pig-monkey.com - writing

Recent Inks

2024-02-22T00:00:00-08:00

Goulet Pens will sell you sample vials of ink. I took advantage of this to expand beyond my long-time staple of Noodler’s 19001 Black, without ending up with a bunch of full bottles I wasn’t going to use. Mostly I was looking for a blue. I came out the other side with two new favorites – neither of which are really blue.

Noodler’s 19808 Heart of Darkness is more black than black. It’s like, how much more black could this be? And the answer is none. None more black. It also dries relatively quickly, and writes well on the cheap paper one often encounters out and about in the world.

Noodler’s 19040 Air Corp Blue-Black isn’t really much of a blue-black. It is more of a teal-black. It’s a really pretty shade, and unique, but still subtle enough that it can be used anyplace there aren’t strict color requirements. This one also dries relatively quickly, and writes well on the vulgar paper of the unrefined. This ink loaded in my Pilot Vanishing Point is my daily writer now.

Working through all these sample vials over the last few months also caused me to move away from piston converter cartridges. I now just use standard cartridges, and refill them with a syringe and needle. This ends up being quicker, cleaner, and less hassle. It also means I can use the last little bit of ink in the container, without buying a snorkel.

The FMP Cutting Board

2023-12-16T00:00:00-08:00

I previously mentioned that I install Rhodia pads in my Field Message Pad backwards, such that the thick cardboard backing is on top. This way when I open the pad, the cardboard provides a surface for writing on the back of the pages, where otherwise I would be writing on top of the FMP cover’s tool slots and the stuff carried within them. This means the other side of the pad has a less firm backing. On a fresh pad this is not an issue, but can become one as pages are consumed and the thickness of the stack of remaining pages is reduced.

My latest innovation in Field Message Pad technology is the addition of a cutting board.

I keep a number of thin HDPE cutting boards on hand at home. I don’t use these in the kitchen, where I care about my knives, but as project mats. If I’m gluing something, or cutting material with a utility knife, I’ll throw one of these mats down to protect the work surface.

I traced a 4x6” square out on one of these, cut it out with a utility knife, and gave the 4 corners a few passes with a file. The resulting piece slides down the back slot of the FMP cover, behind the notebook. With this underneath, and the Rhodia’s cardboard backing on top, I have a firm writing surface from the first page of the notebook to the last, on both sides of the page.

Being able to take notes on a stable surface while standing up, with the FMP in one hand and a pen in the other, feels like a super power.

Also, I always have an A6-sized cutting board with me now. Perhaps for impromptu charcuterie.

FMP Load-Out

2023-11-26T00:00:00-08:00

My Field Message Pad is currently loaded with:

Pilot Vanishing Point, Fine Nib with a Pilot CON-40 piston converter loaded with Noodler’s Blue-Black. This is my new favorite human input device, but I got mine on eBay for a little less than half list price. I’ve been trying the blue-black ink for a few weeks now, but will probably go back to Noodler’s Black.
rOtring 800 loaded with Pentel Ain Stein 0.5 mm HB lead. This is another thing I only own because I found one for less than half the list price. I carried a rOtring 600 in the FMP for years, but I always get stressed about the thin metal tip. The 800 could conceivably be temporarily moved to a pocket if the situation warrants, unlike the pokey 600. And the twist mechanism is fun to play with. Both rOtring pencils are pieces of industrial art, in the same category as Curta calculators, but realistically they are no more functional than the much cheaper Staedtler 925. Quality lead made me reevaluate my previous dislike of mechanical pencils.
Fisher Space Pen M4. Sometimes you need to write off-planet. In pen.
Zebra Onamae Mackee. I used to carry a Sharpie. Then I decided to check if the Japanese had invented a better Sharpie. It turns out the answer is yes, they have.
CountyComm Titanium 15CM Ruler. For many years I carried the General Tools 300/1, but mine became bowed. This is a titanium knock-off of the same. The matte finish makes it harder to read, but I use this more as a straight edge than a measuring device. The bowed-ness of the General Tools stainless version is annoying in that application. The titanium version has been in my kit for 3 years and so far it is still straight and flat.

A 14mm binder clip secures used pages, allowing the pad to quickly be flipped to a blank (or currently in progress) page.

I still primarily use the Rhodia A6 pads. I install them backwards, so that the cardboard backing is on top. This provides a writing surface to more easily utilize the back of the pages. Otherwise I’m writing on top of the FMP’s tool slots, which is annoying. (The thing the Canadians got right is to put heavy cardboard on both sides.)

When expecting inclement conditions, I drop the fountain pen and the Rhodia, and install a Rite in the Rain *46. But given my druthers, it’s all fountain pen all the time.

The Mnemosyne Memo Pad

2023-11-25T00:00:00-08:00

The Field Message Pad remains my primary writing setup. One of its strengths is the ability to switch between pads from Rite in the Rain and Rhodia.

The Field Memo Pad is a useful substitute for quick and short notes. I have multiple, which I keep stashed in different places and bags. But its weakness is that it is dependent upon the Rite in the Rain pad. When not outdoors, I like having the option of switching to normal (fountain pen friendly) paper.

I recently discovered the Maruman Mnemosyne N192A Twin Ring Memo Pad. They label this as B7, which ISO 216 defines as 3.5 x 4.9 inches. But in fact the N129A does not meet the standard. It is instead 3 x 5 inches. This is identical to the Rite in the Rain 135, making it a perfect substitute in this kit.

The paper in the N129A is lined, rather than graphed. This is unfortunate, but for my application I’m willing to overlook this imperfection.

In one of my kits I dropped a magnet down the back pocket. This pad now lives on my refrigerator, perfect for grocery lists and other kitchen related notes.

A Better Clipboard

2019-12-21T00:00:00-08:00

One of the things I learned over the years at 2 Meter Critical Mass and other radio events is the value of a good clipboard. The Field Message Pad or Field Memo Pad or even the Field Notebook are great for my own notes, but when responding with a radio on behalf of an agency, said agency will probably have official log and message forms, and those forms will probably be on 8.5” x 11” paper. A clipboard is an important tool for making those forms usable in the field.

Many people end up with a Gibson approved Saunders Storage Clipboard. They’re nice, but too bulky for my tastes. I use a WhiteCoat Clipboard.

These clipboards are hinged, allowing them to fold in half. They are intended to be folded so that they fit in the pocket of a lab coat and protect patient information from shoulder surfing. But when folded they also fit well into a decent sized cargo pocket, or larger jacket pockets. Folding the clipboard also provides some protection to the paper itself. Even if you’re just putting it in a pack, it’s nice to be able to fold the board and not worry about the paper becoming wrinkled.

The WhiteCoat Clipboard is available with different quick reference medical stickers. None of these are extremely useful to me. I went with the EMT Edition because it has a scale for estimating pupil size, which is something I have struggled with in the past. I’ve considered printing my own stickers to put on the board – perhaps with some kind of radio reference material – but I haven’t decided what information would be useful to include.

A simple rubber band is available to secure the bottom edge of the paper. This is critical to one’s sanity in windy conditions. A pen clip to keep your Fisher Space Pen M4B close to hand completes the package.

The system is overpriced, but I am very happy with its functionality.

The Field Memo Pad

2019-12-20T00:00:00-08:00

While I still believe in the supremacy of the 4” x 6” Field Message Pad, there are times when something smaller is wanted. Perhaps you need something more pocketable, or you have little room in your bag, and you only need small sheets for incidental notes. For these situations I use the Field Memo Pad.

The Field Memo Pad is built around the Mil-Spec Monkey Notebook Cover Plus. This holds 3” x 5” top-bound spiral notebooks, such as the Rite in the Rain 935T. These notebooks are large enough for incidental note taking, and slide easily into a pocket. “Slide” is perhaps not the correct word when the notebook cover is added. The cover is made of Hypalon, which is quite tacky. However this is a feature, not a bug. When you are seated or kneeling and using your leg as a writing surface, the tackiness prevents the pad from slipping around, which is actually quite useful.

The rear flap of the notebook slides into a pocket on the front of the cover. An identical pocket sits on the other side of the cover. I use this rear pocket to hold a few business cards and a universal device reset tool (it’s also a great place for your Bogota Pi picks). An elastic band across the bottom of the cover marks your current page, making it easy to flip to wherever you left off when opening the notebook. Two elastic bands on either side hold writing instruments. I most often use these to keep a Fisher Space Pen 400B Bullet with clip and a black Sharpie Mini, though full-sized writing tools will also fit. The spiral binding of the notebook sits above the top of the cover, allowing the notebook to be opened and folded over completely.

The Field Memo Pad provides everything needed for an all-weather analog data dump, in a pocket friendly format.

Use #361 for the Thyrm CellVault is storage of spare ink cartridges.

2019-02-13T00:00:00-08:00

I keep half a dozen of the aforementioned fine Fisher cartridges (black, red, and blue), as well as a Parker Ballpoint Refill and a Parker Gel Refill in a standard CellVault. Keeping small, infrequently used items like that organized is key for future sanity.

I prefer to use the fine cartridge in my Fisher Space Pens.

2019-02-12T00:00:00-08:00

The difference in line width is negligible – only noticeable when compared side-by-side – but the fine cartridge writes more smoothly and avoids the build-up at the tip that often occurs when the medium cartridge is unused for some time.

The Field Message Pad

2012-11-10T00:00:00-08:00

My first experience with a field message pad was in 2005. I carried a Field Message Pad Cover by Canadian Peacekeeper – now CP Gear – filled with the Canadian military standard issue pad. I was introduced to the concept by one of the early episodes of Patrolling with Sean Kennedy. The idea of having a cover for one’s notepad, which not only protected the pad but also contained pens and the other tools necessary for a dead tree data dump, simply made sense. The system was a pleasure to use, but after filling my last Canadian pad in 2006, I left it in favour of more conventional notepads. The refill pads, being available only from Canada, were difficult to acquire, and all the cool kids were using Moleskines and similar products. I forgot about the old field message pad until this year.

I keep a box that holds all of my filled notepads. Last March I was digging through the box, looking for a particular note (sadly, you can’t grep dead trees), when I came across the Canadian pad and cover. I was reminded of the pleasure the system previously provided me, and the practicality of it. No more digging around for a pen – if you have your notepad, you have your pen. Need to toss your pad into the dirt to free both hands? No problem, it’s protected by the cover. I decided that I would like to revisit the system, but perhaps with a more commonly available pad, and a more mature eye brought to the market’s current offerings.

One of Sean Kennedy’s original requirements for the notepad was that the paper was gridded. I agree with that. Graph paper can be incredibly useful in certain circumstances, and the rest of the time holds no disadvantage for me. The original Canadian pads were gridded, but only on one side of the paper. That made the back of each page less useful, and seemed wasteful to me.

The size of the Canadian pad was acceptable, but a little larger than my ideal. Particularly when the cover was added, it made for just a little bit too much bulk and was sized slightly too large for some cargo pockets. I’d used plenty of the pocket-sized Moleskine notepads. Their size is also acceptable, but if I’m being picky: they’re just a tad too small. Ideally, I would like something sized in between the two.

My third requirements was the the notepad was top-bound. I prefer that over a side-bound pad, as I find them to be easier to access quickly. The binding should be spiral, as that allows the pad to lay open.

It’s a fairly simple criteria, but I was surprised at how difficult it was to accommodate.

The only pad I could find that met the requirements was from Rite in the Rain. Specifically, the 146 (or 946 or 946T for tacticool colors). It is gridded on both sides, is spiral bound on the top, and measures in at 4” x 6” – just slightly larger than a Moleskin, and a bit smaller than the Canadian pad. Rite in the Rain makes an excellent product. I always carry one of their pads when in wilderness environments, but I prefer not to carry them around town. Their waxy paper is unpleasant to write on. If I do not need to worry about the paper getting soaking wet, I prefer to carry a normal notepad. It makes the act of writing more pleasant, which encourages me to write more often.

The nice thing about Rite in the Rain pads, though, is that covers are readily available for them. Tactical Tailor makes a line of covers that Rite in the Rain sells. Maxpedition produces their own. The Tactical Tailor / Rite in the Rain cover for the 146 notepad is the C946. Maxpedition offers a similar cover. They looked great and encouraged me to revisit the notepad search, this time armed with a specific size: 4” x 6”.

Having the dimensions to narrow the search made all the difference. I quickly came upon the Rhodia 13500. It is gridded, 4” x 6”, and top-bound. The exact same as the Rite in the Rain 146, but with normal paper.

These findings allowed me to put together my new field message pad system: a Rite in the Rain pad, Rhodia pad, and a cover. I chose the Tactical Tailor cover simply because it is made about 60 miles from me, where Maxpedition claims that their covers are “imported”. With that cover and two identically sized pads, I could swap in whichever pad was more appropriate for my environment. Around town I carry the Rhodia pad. When I’m heading to the mountains I install the Rite in the Rain pad. Inside the cover I carry a pen (I’m partial to a Parker Jotter with a gel cartridge), a No. 2 pencil, a Sharpie, and a ruler. When I swap the Rhodia pad for the Rite in the Rain, I sometimes also swap the Parker pen for a Fisher Space pen, but in general I don’t like the way the ink comes out of the pressurized cartridges (and I already carry the pencil, which is field-serviceable and is able to write in inclement conditions just as well as the space pen).

I’ve been using this system since April. It is both versatile and functional, and has proved itself perfect for my needs. It is large enough to write on without feeling cramped, and small enough to place in the cargo or ass-cheek pocket of my pants when running around the woods in the middle of the night setting up dead-drops. The cover, Rite in the Rain pad, ruler, Sharpie and pencil are all made in the US. The Parker pen and Rhodia pad are made in France.

Photo comparisons between this and the Canadian system are available on Flickr.

DIY Field Notebook Hack

2010-05-21T00:00:00-07:00

Here’s an idea I stole from the excellent BFE Labs: hacking a Rite in the Rain notebook to include a retention strap. The original idea at BFE was just a strap to keep the notebook closed and contain loose leafs that were shoved inside, but while making the strap he accidentally cut the webbing too short. To solve this he sewed on another piece of webbing as an extension and found that the overlap between the two pieces made a good pen holder.

I thought this was a neat idea, but the tri-glide fastener used in BFE’s version seemed a little cumbersome. I knew I would want some sort of quick release buckle. A traditional side release buckle would be too bulky for my tastes, particularly when the notebook is shoved in a pocket. The other thought I had was that using elastic webbing for the pen loop might increase the versatility of the strap, since it could expand to fit different sized tools.

I didn’t have any 1” elastic webbing hanging about, but I did have some spare webbing and an old buckle from a previous project. With those two things along with a knife and my repair kit, I set out to see what I could do about whipping up some kind of strap.

My initial intention was to create the pen loop the same way as the BFE strap: cut one strap short and sew on an extension piece with a bit of an overlap. But before I got to that part, I had to sew one end of the buckle onto the webbing. In preparing to do this, I realized that I would already be sewing a loop right there. I could just pull a bit more webbing through the buckle to create my overlap, throw in a stitch to hold down the end of the webbing, another stitch closer to the buckle, and between the two I would have the perfect loop for my pen. Simple.

On the back of the notebook I created two slits for the webbing to pass in and out of, just like in the BFE hack (except I used my knife rather than a Dremel tool).

I’m happy with how this hack came out and will probably perform it on my other Rite in the Rain notebooks. The whole process takes only a few minutes and does not strain my juvenile sewing skills. My one complaint is with the buckle that I happened to choose. I appreciate the low profile, center-release design, but the male end of it doesn’t grip the webbing very well. This means that while it is adjustable, it doesn’t hold much tension, and so the buckle doesn’t snap open as much as it should when I release it. I’m thinking of sewing the webbing down on the male end of the buckle just like I did on the female end. The strap would no longer be adjustable, but I could be guaranteed the proper tension and that the buckle would open with the speed and ease which I desire. This would also present the opportunity for me to create another loop to hold a second tool. Perhaps a pencil or a highlighter to go along with the pen.

Weapons

2008-03-04T00:00:00-08:00