Month: November 2009

Does the road wind uphill all the way? Yes, to the very end. Will the day’s journey take the whole long day? From morn to night, my friend. But is there for the night a resting-place? A roof for when the slow, dark hours begin. May not the darkness hide it from my face? You cannot miss that inn. Shall I meet other wayfarers at night? Those who have gone before. Then must I knock, or call when just in sight? They will not keep you waiting at that door. Shall I find comfort, travel-sore and weak? Of labour you shall find the sum. Will there be beds for me and all who seek? Yea, beds for all who come. Christina Georgina Rossetti, Uphill

If an inner-tube can be used to rubberize a BIC lighter, why not a knife?

One of the pesky traits of the wooden handled Mora knives is their lack of grip when wet. One could acquire a Mora with a rubber handle, but, let’s face it: those are ugly. Instead, I cut a piece of 700x35 bicycle inner-tube about an inch wide and slide this just less than halfway on to the handle. The grip is immediately improved. If you were so inclined, you cut a piece the length of the handle and cover the whole thing, but so far it seems that this small piece is enough.

As with the rubberized BIC, this also provides another way to carry tinder that will work even when wet (though it will require a lighter or candle to start).

Here’s a neat trick I picked up from Dusty’s YouTube video. In the video, he shows how to use a couple of old bicycle inner-tubes to make a semi-waterproof pouch for a BIC lighter. That didn’t appeal to me too much: I always carry a BIC in my pocket and his idea added to much bulk for my liking. But, at the end of the video, he cut a smaller piece of inner-tube to make a sort of sheath for the lighter.

I thought that was a great idea. It gives you a nice, rubberized grip for the BIC and provides a simple way of always carrying waterproof tinder.

I’ve now cut off pieces from a 700x35 bicycle inner-tube and made this modification to all my lighters.

Linseed oil is a popular product used to coat and protect wooden handles on knives, axes, and other tools. I’ve tried it a couple times, but I’m not a big fan of the stuff. It takes multiple coatings over a long period of time to get a decent finish, it seems to rub off easily with use, and that whole spontaneous-ignition-of-linseed-oil-soaked-rags thing makes me a little nervous.

My preference is with Howard Citrus-Shield Premium Natural Paste Wax. I first stumbled upon this stuff in a hardware store while I was looking for linseed oil. The store didn’t seem to stock the oil, but the “Citrus Shield” can caught my eye. I remembered reading that Ragnar sometimes used some sort of orange-scented wax on certain wooden knife handles, so I brought the can home to try it out.

It turns out that the stuff works really well. All it consists of is a mixture of natural wax and oil. Initially, there is a very strong citrus scent, but this quickly wears off after application. I use it on all my wooden handled blades now, including the specially processed bamboo handle on the BCNW-O1 (which is supposed to be water resistant, but I found that it would swell some when damp before I treated it with the wax).

The application is very simple. The instructions on the can say to apply a thin coat with a clean rag, but I just use my fingers. After rubbing it into handle, I let it sit for 5 minutes before wiping it off with a clean rag. If this is the first time I’m treating the wood, I’ll apply and wipe off the wax about 3 times. After the final wipe down, I rub the handle with fine 0000 steel wool. I don’t put a whole lot of time or effort into this buffing, though. I’m not seeking a shiny finish, just practical protection.